EXAIR's Atomizing Spray Nozzles atomize fluids (most commonly water) in a range of spray patterns for a variety of uses. They combine liquid and compressed air to create a mist of atomized liquid that can be easily adjusted to meet the needs of your application. All models use stainless steel construction for durability and corrosion resistance. Atomizing spray nozzles are available in 1/8 NPT, 1/4 NPT and 1/2 NPT sizes.
Internal mix nozzles mix the liquid and air inside the air cap and produce the finest atomization. Internal mix nozzles can be used on liquids with a viscosity up to 300 cP. Both air and liquid sides are pressure fed.
External mix nozzles have the highest fl ow rates and allow the air and liquid flows to be adjusted independently. Th ese nozzles are best where precise liquid flow is needed. External mix nozzles can be used on liquids with a viscosity above 300 cP. Both air and liquid sides are pressure fed.
Siphon fed nozzles require no liquid pressure and can be used with gravity fed liquids or liquids from a siphon height as much as 36 inches (91cm). Siphon fed nozzles can be used on liquids with a viscosity up to 200 cP.
External mix nozzles have the highest fl ow rates and allow the air and liquid flows to be adjusted independently. These nozzles are best where precise liquid fl ow is needed. External mix. External Mix Atomizing Nozzles are for pressure fed applications with independent air and liquid control. Nozzles can be used on liquids with a viscosity above 300 cP. Both air and liquid sides are pressure fed.
Siphon fed nozzles require no liquid pressure and can be used with gravity fed liquids or lift liquids from a siphon height as much as 36 inches (91cm). Siphon fed nozzles can be used on liquids with a viscosity up to 200 cP Siphon Fed Atomizing Nozzles are siphon or gravity fed No Drip for non-pressurized applications.
These spray nozzle accessories help with positioning and help keep your process up and running.
