Call Us

+91 9820577935

Material such as paper, plastic or textiles normally contain an equal number of positive and negative charges - that is, they are electrically balanced. Friction can disturb this balance, causing the material to become electrically charged. The electrical charge (static) will exert a force on nearby charged objects or a grounded conductor.

Gen4 Super Ion Air Knife

Gen4 Super Ion Air Knife

EXAIR's Gen4 Standard Ion Air Knife off ers 30% improved performance at low pressures allowing you to achieve the same or better results, which saves compressed air and money. It is a lower cost air knife solution where air consumption and noise level are not critical to the application.

  • • Entrains surrounding air for increased performance
  • • Stock continuous lengths up to 108" (2,743mm)
  • • CE and RoHS compliant, UL component recognized
  • • Meets OSHA noise and pressure requirements

Gen4 Standard Ion Air Knife

Gen4 Standard Ion Air Knife

EXAIR's Gen4 Standard Ion Air Knife off ers 30% improved performance at low pressures allowing you to achieve the same or better results, which saves compressed air and money. It is a lower cost air knife solution where air consumption and noise level are not critical to the application.

  • • 30:1 air amplification
  • • CE and RoHS compliant, UL component recognized
  • • Meets OSHA noise and pressure requirements

Gen4 Ionizing Bar

Gen4 Ionizing Bar

EXAIR's Gen4 Ionizing Bar is engineered to perform up to 25% better than previous models for applications where the bar is mounted within 2" of the surface it is treating. It is designed for applications where blowing air would disturb the production process.

  • • Available up to 108" with rapid static decay
  • • Shockless, non-radioactive
  • • Low maintenance
  • • CE and RoHS compliant, UL component recognized

Gen4 Super Ion Air Wipe

Gen4 Super Ion Air Wipe

Super Iron Air Wipe produces a uniform 360° stream of static eliminating ions. Ideal for static elimination on pipes, extrusions, cable and more. It is ideal for use on pipe, cable, extruded shapes, hose, wire and more. It maximizes ionized airflow while minimizing compressed air consumption.


  • • No moving parts - no wiper
  • • Rapid static decay
  • • Split design clamps easily around moving parts
  • • CE and RoHS compliant, UL component recognized

Gen4 Ion Air Cannon

Gen4 Ion Air Cannon

Ion Air Cannon delivers concentrated flow of ionized air. Neutralizes static electricity and cleans at distances up to 15 feet (4.6m). With an optional pressure regulator, the air volume and velocity are infinitely adjustable over a wide range, for light to heavy duty applications.


  • • No moving parts to clog or wear out
  • • Rapid static decay
  • • Intake can be ducted
  • • CE and RoHS compliant, UL component recognized
  • • Meets OSHA noise and pressure requirement


Gen4 Ion Air Gun

Gen4 Ion Air Gun

EXAIR's Gen4 Ion Air Gun combines incredibly fast static decay rates with low compressed air consumption. Ion Air Gun lightweight, handheld static elimination. Ideal for dust removal on hard-to-reach parts prior to assembly, packaging, painting or finishing.


  • • Electromagnetically shielded high voltage cable
  • • Rugged and lightweight
  • • Shockless, non-radioactive
  • • CE and RoHS compliant, UL component recognized
  • • Meets OSHA noise and pressure requirements

Gen4 Ion Air Jet/Gen4 Stay Set Ion Air Jet

Gen4 Ion Air Jet/Gen4 Stay Set Ion Air Jet

EXAIR's Gen4 Ion Air Jet delivers a concentrated airfl ow that can cover a precise spot without disturbing other areas. Ion Air Jet like the Ion Air Gun but designed for fixed workstation operations. Can be permanently mounted or mounted with flexible Stay Set Hose to allow for blowoff on parts of varying shape.


  • • Shockless and non-radioactive
  • • Electromagnetically shielded high voltage cable
  • • Replaceable stainless steel emitter point
  • • CE and RoHS compliant, UL component recognized
  • • Meets OSHA noise and pressure requirements

Gen4 Ionizing Point

Gen4 Ionizing Point

EXAIR's Gen4 Ionizing Point is a compact, single point ionizer ideal for winding, rewinding or slitting operations. It can also be mounted through a duct to neutralize static charges due to moving air or materials.


  • • Durable stainless steel emitter
  • • Rapid static decay
  • • Armored high voltage cable protects against abrasion
  • • CE and RoHS compliant, UL component recognized

Static Eliminator Accessories

Static Eliminator Accessories

Identify the source of your static problems and keep your static eliminators maintained with these helpful accessories.


  • • EXAIR's Static Meter locates and provides a value of static charge within your process so you can begin solving your static related problems
  • • Replacement emitter points and power supplies available here